FireLite MS 4812 / 4824 Basics

Resetting Reset Key
Alarm Bell Silence Bell Silence Key
Keypad Silence Buzzer Silence Key
(If alarm from water flow sensor bells won’t reset until water turned off)
Bypassing Zone Disable (#) Key + Zone number, repeat to clear bypass
Status Lights
A/C Power On
Alarm Alarm Condition Detected
Supervisory Supervisor Condition Detected
Trouble Zone, Sensor and/or System Trouble
Disable Zone, Sensor and/or System Bypassed
Program Mode User in Programming
Test Mode When any Test activated
Display Display Mode (shows alarms, troubles, bypasses, superv.)
Enter Display Mode Press Display (*) Key
Exit Display Mode Press End (9) key
System Troubles
A0 Polling Loop Short
A1 Programmed by Installer
A2 Programmed by Installer
A3 Mail Bell Circuit Fault
A4 Aux Bell Circuit Fault
A5 Ground Fault
A6 Telco Line 1 Fault
A7 Telco Line 2 Fault
A8 Low Battery (Main backup)
A9 A/C Power Loss
AA Kiss Off Failure
AB Bell Silenced
Disable Zones/Sensors/Outputs have been bypassed
E0 Main Bell Disabled
E1 Aux Bell Disabled
E2 Aux Alarm Relay Disabled
E3 Aux Trouble Relay Disabled
E4 Reversing Relay Disabled
E5 Communicator Disabled
Other Keypad Keys
STEP (6) Key allows viewing of display at one time in sequence
SCAN (5) Key returns to automatic zone display sequence
END (9) Key returns to regular operating mode