FBI XL4C / XL4C Program

If Master Code is lost the panel MUST be downloaded or defaulted
Entering Program CODE * 123456 1
Options Code + * + Installer Code + 1 = Enter Programming
Code + * + Installer Code + 2 = Time/Date Setup
Code + * + Installer Code + 3 = Walk Test without Bell
Code + * + Installer Code + 4 = Walk Test With Bell
Code + * + Installer Code + 5 = Default Panel
Code + * + Installer Code + 6 = System Log View (Event Buffer)
Moving to Location * + STAY + 3-digit location
Program Keys
STAY saves data and moves to next programming location
BYPASS goes back to previous programming location
0 toggles options within location
INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
Exiting Program Press * and # at same time
BELOW FIELDS ARE DIFFERENT DEPENDING ON VERSION OF XL-4
Communications
Question Suggest Variables
001 Callback Number Leave Blank Up to 32 digits
002 Dump Telephone Number Leave Blank Up to 32 digits
003 CS 1 Receiver Telephone Number
SHIFT + 2 (B) = *
SHIFT + 3 (C) = 3 second delay
SHIFT + 4 (D) = # 		18xxxxxxx Up to 32 digits
To erase move cursor to beginning of number by pressing CODE then * 8
004 CS 1 Receiver Type Ademco Point ID FBII Super 1400Hz
FBII Super 2300Hz
Ademco Point ID
4/2 Express
BFSK 2300
The rest is all 4/2
005 CS 1 Acc Size (Account length)
(Press 0 to toggle) 		4-Digit Account 3-Digit Account Number
4-Digit Account Number
006 CS 1 Parity Selection No Yes = Report Parity Enabled
No = Report Parity Disabled
007 CS 1 Sescoa Format No Yes = Sescoa Format Enabled
No = Sescoa Format Disabled
008 CS 2 Receiver Telephone Number 18xxxxxxx Up to 32 digits
009 CS 2 Receiver Type Ademco Point ID FBII Super 1400Hz
FBII Super 2300Hz
Ademco Point ID
4/2 Express
BFSK 2300
The rest is all 4/2
010 CS 2 3/4 Digit Account Select 4-Digit Account 3-Digit Account
4-Digit Account
011 CS 2 Parity Selection No Yes = Report Parity Enabled
No = Report Parity Disabled
012 CS 2 Sescoa Format No Yes = Sescoa Format Enabled
No = Sescoa Format Disabled
013 Installer Code 123456 Leave alone
014 Dialing Type Tone Tone
Fast Tone
Pulse
Adaptive (Tone w/Pulse backup)
015 Dial Tone Detection No Yes = Wait for dial tone before dialing
No = No wait for dial tone before dialing
016 CS Dialer Enable Yes Yes = Communicator Enabled
No = Communicator Disabled
017 Remote Commands Enable
(Downloader Arm/Disarm etc) 		Yes Yes = Allow Remote Commands
No = No Remote Commands
018 Remote Disarm Enable Yes Yes = Remote Disarming Enabled
No = Remote Disarming Disabled
019 Remote Arming Enable Yes Yes = Remote Arming Enabled
No = Remote Arming Disabled
020 Remote Bypass Enable Yes Yes = Remote Bypassing Enabled
No = Remote Bypassing Disabled
021 # Attempts (Dialing Attempts) 08 01 to 16 Attempts (08 = Default)
022 # of Rings to Pickup 08 01 to 16 Rings (08 = Default)
023 Extended Antijam No Yes = 4 Second wait until Dialing
No = 30 Second wait until Dialing
024 Extended Ack No Yes = 120 Sec wait for Ack from CS
No = 30 sec wait for Ack from CS
User Attributes
(Pick a user in 025 and program individual attributes)
Question Suggest Suggest
025 Select User Number 01 to 64, 000 = Skip
026 User Authorization Level
Level 1 (Super User, does almost everything)
Level 2 (Arm/Disarm/Bypass/Program Users, Change Partition)
Level 3 (Arm/Disarm/Bypass/Program Users)
Level 4 (Arm/Disarm/Bypass)
Level 5 (Arm/Disarm)
Level 6 (Duress)
Level 7 (Arm Only, Maid Code)
027 User CS ID 001 to 255 (User Number for Open/Closings)
028 User Partition Assignment YNNNNNNN (Use INSTANT and CODE to move left/right)
(0 toggles Y/N for each of the 8 partitions)
029 OC Partition Enable YYYYYYYY (Use INSTANT and CODE to move left/right)
(0 toggles Y/N for each of the 8 partitions)
030 User Master Partition Not Sure 1 to 8
System Attributes
Question Suggest Suggest
031 Zone Expansion Modules
(Zones 9 to 72) 		No Expand
NO EXPAND (No Expansion Module)
8 ZONE EXP (7105 Zone Expander)
MUX EXPAND 1 (7120/7126 Multiplexer)
MUX EXPAND 2
032 Xtrig Mode No (Yes if XL-4705 Relay Module used)
033 Open/Close Report Path CS#1 Only CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (Reports)
034 Enable Autoarm NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 partitions)
035 Clock Path None CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (Reports)
036 Test CS Path None
037 Test Frequency Sunday
12 Hour Wednesday
24 Hour Thursday
Sunday Friday
Monday Saturday
Tuesday
038 Test Time Hr 02 00 to 23 Hours
039 Test Time Mn 00 00 to 59 Minutes
040 Down Path
(Download OK signal) 		None CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (Reports)
041 Bypass Path None
042 Dis Byp Stay No Yes = Bypassed Zns not Transmitted to CS
No = Bypassed Zns Transmitted to CS
043 Xmit Bypass On Bypass On Bypass = Sends signal on Bypass
On Arming = Sends signal on Arming
044 Auto Unby En Yes Yes = Bypassed Zns unbypass w/Disarm
No = Bypassed Zns Manually Unbypassed
045 Arm Out Lev High High = Trigger Voltage High on Arming
Low = Trigger Voltage Low on Arming
046 Bell Tst Arm No Yes = Bell Test on Arming
No = No Bell Test on Arming
047 Bell Rbak No Yes = Bell Ringback at Closing
No = No Bell Ringback at Closing
048 Sound Rbak Yes Yes = Keypad Ringback on all Signals
No = No Keypad Ringback
049 Fire Verif Yes Yes = Relay 2 used as Fire Reset
No = Relay 2 not used for Smokes
050 Enable Reset No Yes = * Key resets Fire
No = User Code resets Fire
051 Enable Restore to Follow Loop No Yes = All Rest Signals follow Loop
No = Restores after Bell Cutoff
052 Action on Abort No Abort Abort Code (Sends Abort Code)
Stop Dialing (Kills Communicator)
No Abort
Restore (Transmits Restore Code)
053 Cross Partition Yes Yes = # 0 allows User to other Partitions
No = No User access to other Partitions
054 Enable Quick Arming Yes Yes = # 1 Quick Arms
No = No Quick Arming allowed
055 Enable Quick Forced Arming Yes Yes = # 2 Quick Force Arms
No = No Quick Force Arming Allowed
056 Secure Forced Arm Enable Yes Yes = User Code to Force Arm
No = No User Code to Force Arm
057 Enable Zone Directory Yes Yes = # 4 can scroll Zone Descriptions
No = No scrolling Zone Descriptions
058 Quick Bypass Yes Yes = # 5 Bypassing Enabled
No = Quick Bypassing Disabled
059 Chime Control Yes Yes = # 6 Enables Door Chimes
No = Door Chimes not Allowed
060 Enable Super User (Level 0) Yes Yes = Level 1 Users alter Partition info
No = No Users can alter Partition info
061 Multi Partition Arm/Disarm Arm/Disarm Arm/Disarm = Allows multi Part Arming
Disabled = # 0 is not permitted
062 User # + Code No Yes = 7 digit User Codes
No = 4 digit User Codes
063 CS/Inst Def No Yes = CSID & Installer Code Lockout
No = Not Locked out
064 Kpad Prog Yes Yes = Allow Keypad Programming
No = No Keypad Programming
065 Daylte Sav Yes Yes = Switch Time automatically
No = No Daylight Savings
066 AC Freq 60 Hz 50 Hz AC Line Frequency
60 Hz AC Line Frequency
System Timing
Question Suggest Suggest
067 Bell Delay 15S 00 00 (No Delay) to 15 x15 Seconds
Before Bell activation from Relay #1
068 Dialer Delay 15S 01 00 (No Delay) to 15 x15 Seconds
Before Dialer activation
069 Exit Del 1 15S 04 (60 seconds) 00 (None) to 15 x15 Seconds
070 Exit Del 2 15S 04 (60 seconds) 00 (None) to 15 x15 Seconds
071 Entry Del 1 15S 02 (30 seconds) 00 (None) to 15 x15 Seconds
072 Entry Del 2 15S 04 (60 seconds) 00 (None) to 15 x15 Seconds
073 AC Loss 15MN 04 (60 minutes) 00 (None) to 15 x15 Minutes
074 Exit Triggers NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
075 Entry Triggers NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
076 Timeout1 1MN (Timeout for Relay 1) 14 (14 minutes) 00 (None) to 15 Minutes
077 Timeout2 2MN (Timeout for Relay 2) 15 (15 minutes) 00 (None) to 15 Minutes
078 Timeout3 3MN (Timeout for Relay 3) 03 (3 minutes) 00 (None) to 15 Minutes
079 Global Bell Lockout 15 (15 Activations) 00 to 15 Activations
080 Local Bell Lockout 15 (15 Activations) 00 to 15 Activations
081 Global Dialer Lockout 15 (15 Activations) 00 to 15 Activations
082 Local Dialer Lockout 15 (15 Activations) 00 to 15 Activations
System Fuction Codes
Question Suggest Suggest
083 En Zone Tamper Yes Yes = Zone Tamper sends Report
No = Zone Tamper doesn’t send
084 Bypass Code 0 0 to F, 6 = Default
This report auto sends if Contact ID
085 Bypass Restore Code 0 0 to F, E = Default
This report auto sends if Contact ID
086 Abort Code D 0 to F, D = Default
This report auto sends if Contact ID
087 Open Code 0 0 to F, B = Default
This report auto sends if Contact ID
088 Close Code 0 0 to F, C = Default
This report auto sends if Contact ID
089 Clock Code 0 0 to F, 0 = Default
This report auto sends if Contact ID
090 Cancel Code 0 0 to F, F = Default
This report auto sends if Contact ID
091 Cancel Path CS#1 Only CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (No Reports)
092 CS Test Code 8 0 to F, 8 = Default
This report depends on Location 093
093 Test ID Code 253 000 to 255, 253 = Default
This report auto sends if Contact ID
094 AC ID Code 250 000 to 255, 250 = Default
This report auto sends if Contact ID
095 Low Batt ID 251 000 to 255, 251 = Default
This report auto sends if Contact ID
096 System Error ID Code 254 000 to 255, 254 = Default
This report auto sends if Contact ID
097 Download Code (End Download) F 0 to F, F = Default
This report auto sends if Contact ID
098 Down ID Code 255 000 to 255, 255 = Default
This report auto sends if Contact ID
099 Buzzer on AC Loss Yes Yes = Keypad Buzzer on AC Loss
No = No Buzzer on AC Loss
100 Buzzer on Low Battery Yes Yes = Keypad Buzzer on Low Battery
No = No Buzzer on Low Battery
101 Buzzer on System Error Yes Yes = Keypad Buzzer on System Error
No = No Buzzer on System Error
102 24 Hour AC Loss Yes Yes = Buzzer on AC Loss if Armed
No = No Buzzer on AC Loss if Armed
103 24 Hour Low Battery Yes Yes = Buzzer on Low Battery if Armed
No = No Buzzer on Low Battery if Armed
104 24 Hour System Error Yes Yes = Buzzer on System Error if Armed
No = No Buzzer on System Error if Armed
105 Trouble Type AC Loss 1 1 to 4, 1 = Default (see loc 129 to 141)
106 Trouble Type Low Battery 2 1 to 4, 2 = Default (see loc 129 to 141)
107 Trouble Type System Error 4 1 to 4, 4 = Default (see loc 129 to 141)
Alarm Types
(These are not pre-defined that I know of, you must set them up)
Question Suggest Suggest
108 Select Alarm Type 01 to 16, 00 = Skips
109 Description (enter Delay, Instant, Interior etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
110 CS Code ? 0 to F
If contact ID Click Here
111 CS Restore Code 0 0 to F
112 CS Reporting Path CS#1 Only CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (No Reports)
113 Bell Delay No Yes = Bell Delays per Location 067
No = No Bell Delay
114 Dialer Delay No Yes = Dialer Delays per Location 067
No = No Dialer Delay
115 Buzzer Enabled
    (No if Silent Alarms & Holdup) 		Yes Yes = Keypad Buzzer on Alarm
No = No Keypad Buzzer Delay
116 Display Alarm
    (No if Silent Alarms & Holdup) 		Yes Yes = Keypad Display on Alarm
No = No Keypad Display Delay
117 Timeout Selection ? 1 to 3 (see Timeouts in Loc 076 to 078)
118 Alarm Priority ? 01 (Highest) to 16 (Lowest)
Example: Fire, Duress = highest (16)
Burg would be next highest 15?
Supervisory orTroubles could be 14?
119 Momentary Triggers
(Trigger 1 to 8 activated by alarm) 		NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for 8 Triggers)
120 Latched Triggers
(Trigger 1 to 8 Latched alarm) 		NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
Triggers 7 and 8 must be N if XL4705 External Relay is NOT used
121 Relay 1 (Bell) Select NONE NONE (0 toggles selection)
PULSED
LATCHED
122 Relay 2 Select NONE
Questions 123 to 127 only if XL4705 External Relay is used
123 Xtrig 1 ATxx (Relay Address) 00 00 to 40
124 Xtrig 2 ATxx (Relay Address) 00 00 to 40
125 Xtrig 3 ATxx (Relay Address) 00 00 to 40
126 Xtrig 4 ATxx (Relay Address) 00 00 to 40
127 Mom Trig
(which Trigger 1 to 4 is Momentary) 		NNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
128 24Hr Trigger
(which Trigger 1 to 4 is Maintained) 		NNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
Trouble Types
(Trouble Attributes)
Question Suggest Suggest
129 Select Trouble Type 01 to 8, 0 = Skips to next Location
130 Description (enter Fire Trouble, Zone Trouble etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
131 CS Code Trouble ? 0 to F
132 CS Trouble Restore ? 0 to F
133 CS Rep (Transmission Path) CS#1 Only CS#1 Only
CS#2 Only
CS#1 & CS#2
CS#1 BU CS#2 (CS2 as Backup)
CS#2 BU CS#1 (CS1 as Backup)
None (No Reports)
134 CS Dial Del (Trouble Dialer Delay) Yes Yes = Dialer Delay per Loc 68
No = No Dialer Delay
136 Timeout ? 1 to 3 (see locations 076 to 078)
137 Priority ? 0 (Highest) to F (Lowest)
138 Mom Trg
(1 to 8 is Temp activated by Trbl) 		NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
139 Lat Trg
(1 to 8 is activated by Trbl) 		NNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
140 Relay 1 (Bell) Select NONE NONE (0 toggles selection)
PULSED
LATCHED
141 Relay 2 Select NONE
Zone Attributes
Question Suggest Suggest
142 Select Zone 001 to 008, 000 Skips to next Location
009 to 128 if Zone Expander Used
143 Zone Type ? Instant (0 toggles options)
Entry/Exit
Interior EE Follower
Interior
Fire – Smoke
Fire – Pull Station
Keyswitch
144 Description (enter Living Room, Den, Hall, Front Door etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
145 CS Report Code (if 4/2 Format) 000 000 to 255 (000 disables)
146 CS PID (if Contact ID Format) ??? 001 to 422
147 Right Loop Zone No Yes = This is a Multiplex Zone
No = This is not a Multiplex Zone
148 Enable Bypassing
(Yes if Burg, No if Fire) 		Yes Yes = User can bypass this Zone
No = User cannot bypass this Zone
149 Auto Bypass
(Arm away and Entry Zone not open) 		No Yes = Auto Bypass Enabled
No = Auto Bypass not Enabled
150 Arm if Faulted
(Zone must close before E/E Delay) 		No Yes = Arm if Faulted
No = Don’t Arm if Faulted
151 En Vent
(Auto Bypasses open Zns on Arm) 		No Yes = Arm and Auto Bypass if Faulted
No = Don’t Arm if Faulted
152 Group Enabled No Yes = Add to Group for Bypassing etc
No = Don’t add to Group
153 CS Trouble Yes Yes = Report Zone Troubles
No = Do not report Zone Troubles
154 CS Restores (Alarms/Troubles) No Yes = Report Zone Restores
No = Don’t report Zone Restores
155 Partition ? 1 to 8 (1 if no partitions enabled)
156 Enable 24 Hour Zone No Yes = Zone is a 24 Hr Zone (Fire/Holdup)
No = Zone is a normal Zone
157 Enable 24 Hour Trouble No Yes = 24 Hour Zone Trouble (Fire)
No = Zone is a normal Zone
158 Alarm Type ? 01 to 16 (defined in Loc 108 to 128)
159 Trouble Type ? 1 to 8 (defined in loc 129 to 141)
160 Al Open
(No for Smoke Detector) 		Yes Yes = Alarm on Open Circuit
No = No Alarm on Open Circuit
161 Al Shrt
(Yes for Keyswitch and Smoke Det) 		Yes Yes = Alarm on Short Circuit
No = No Alarm on Short Circuit
162 Tr Open
(Yes for Smoke Detector) 		No Yes = Trouble on Open Circuit
No = No Trouble on Open Circuit
163 Tr Short
(No for Smoke Detector) 		No Yes = Trouble on Short Circuit
No = No Trouble on Short Circuit
164 Exit Delay
(only on E/E and Interior Zones) 		Delay 1 Delay 1 (0 toggles selection)
Delay 2
165 Entry Delay
(only on E/E and Interior Zones) 		Delay 1 Delay 1 (0 toggles selection)
Delay 2
166 EN Lock (Swinger Shutdown) Yes Yes = Lockout (Specified in Loc 79 to 82)
No = No Bell/Dialer Lockout
167 CS Bypass (Bypass Reporting) No Yes = Will send Bypass Code to CS
No = Will not send Bypass Code to CS
168 Trouble Buzzer Yes Yes = Zone Troubles sound KP Buzzer
No = No KP Buzzer if Zone Trouble
169 En Chime ? Yes = Enable Chime for this Zone
No = No Chime for this Zone
170 En 750M (Hardwire Zones only) Yes Yes = Zone has 750ms Response
No = Zone has 250ms Response
171 Pulse Count 15 1 to 14 Mins, per activation 15 = Disabled
172 # Pulse 00 00 to 15 activations per period
defined in Location 171
Keypad Conditions
Question Suggest Suggest
173 Select Keypad Type 1 to 4, 0 = Skips 1 = * + # Alarm
2 = * + 1 Alarm
3 = 3 + # Alarm
4 = Duress Signal
174 CS Code (4/2 Format only) 000 00 to 255, 000 Disables
175 CS PID (if Contact ID Format) ??? 001 to 422
176 Description (enter Fire Trouble, Zone Trouble etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
177 Al TY KP (Alarm Type) ? 01 to 16 (specified in Loc 108)
178 CS Rest No Yes = Sends Restore after Alarm
No = Doesn’t send Restore
Partitions
Question Suggest Suggest
179 Select Partition 1 to 8, 0 = Skips
180 Keypad Partition
Keypads 1 to 8 are LED
Keypads 9 to 16 are LCD 		NNNNNNNNYNNNNNNN (INSTANT/CODE moves Left/Right)
(0 toggles Y/N for each of 8 Triggers)
181 Description Partition (enter Warehouse, Store Room, Apartment etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
182 CS1 Account Number ???? SHIFT 1 = A
SHIFT 2 = B
SHIFT 3 = C
SHIFT 4 = D
SHIFT 5 = E
SHIFT 6 = F
183 CS2 Account Number ????
Auto Dump
(normally leave alone)
Question Suggest Suggest
184 Auto Dump None None (0 toggles options)
Daily
Weekly
Monthly
185 Day of Month 01 01 to 31 Days
186 Day of Week Sunday Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
187 Report Hour 00 00 to 23
188 Report Minute 00 00 to 59
189 Dump Max 99 00 to 99 Events
190 Auto Dump Account ???? 4-Digit Account Number to Identify
191 Auto Dump Description 1 (enter whatever you want etc here)

INSTANT advances within a programming location
CODE moves backwards within a programming location
* 8 erases everything from cursor to end of field
7 scrolls letters for text questions
192 Auto Dump Description 2
193 Auto Dump Description 3
193 Auto Dump Description 4