FBI XL4C / XL4C Codes

If Master Code is lost the panel must be downloaded or set for Service
Master Code User 001
Secondary Codes User 002 to 063
Hostage Code Any User Code set to Authority 6
Add Code 1. Press CODE key
2. Enter Master Code then User (001 to 064)
3. Enter New 4 or 7-Digit User Code + User Level (1 to 7)

1 – Arm, Disarm, Bypass, change User Codes on all partitions
2 – Arm, Disarm, Bypass, change User Codes on its own partition
3 – Arm, Disarm, Bypass, change other Codes
4 – Arm, Disarm, Bypass (Normally use this for secondary Codes)
5 – Arm, Disarm
6 – Duress/Hostage Code
7 – Arm only

4. Press * to exit
(to change User 003 to 5432 press CODE + Master + 003 5432 4 * )

Erase Code 1. Press CODE key
2. Enter Master Code
3. Enter User (001 to 064) to delete
4. Press #
5. Press * to exit
(Example: To delete User 003 press CODE + Master + 003 # * )
Partition
Assignment 		1. Press # + 7 + Master Code
2. Enter User (001 to 064)
3. Display shows

4. Lower line shows Partition assigned, 1 to 8 toggles digits 1 to 8 ON or OFF
(Example: to assign to Partition 1 and 3 press 2, 4, 5, 6, 7, 8 to turn OFF)
5. Press * to exit