| Zones |
4 Hardwire, up to 8 with Wireless |
| Fuses |
3 Amp for Bell, 1 Amp for Aux |
| Resistors |
2.2K |
| AC Transformer |
16 volt 25VA |
| Batteries |
| Main Panel |
12 volt rechargeable Gel-Cell inside |
| Door/Windows |
3-Volt Lithium |
| Motion Sensor |
2 3-Volt Lithium |
| Smoke Detector |
2 9-volt Alkalines |
| Remote Keypads |
3-Volt Lithium |
| Keyfobs |
3-Volt Lithium |
| Remote Panics |
9-Volt Lithium |
|
| Wireless |
Yes, uses Ademco Transmitters |
| Downloadable |
Yes |
| Panic Buttons |
| Police Panic |
* and # |
| Fire Panic |
7 and 9 |
| Medical Panic |
1 and 3 |
|
| Arming |
4-digit code (Ready light MUST be on) |
| Stay Arming |
STAY key + 4-digit code |
| Instant Arm |
INSTANT key + 4-digit code (Can be used with STAY key) |
| Disarm |
4-digit code |
| Silence Alarm |
4-digit code to turn off siren, and again to stop keypad flashing |
| Bypass |
BYPASS + 4-digit code + Zone (1 to 8) (Bypassed Zone will slowly blink)
(to bypass more press BYPASS + zone)
|
| Quick Bypass |
BYPASS + Zone (1 to 8) (if enabled) (Bypassed Zone will slowly blink) |
| Quick Exit |
Press STAY if armed for Exit delay (if enabled) |
| Reset Smoke |
Enter 4-digit code or enter 4-digit code + *
(If this does NOT reset smoke detector set for service, smoke is bad)
|
| Door Chimes |
# 6 |
| Quick Arm |
# 1 (if enabled) |
Quick
Force Arm
|
# 2 (if enabled) |
| Alarm Memory |
There is no Alarm Memory |
| Set Time |
| 1. Press # 3 |
| 2. Enter 2-digit Hours |
(01 to 23) |
| 3. Enter 2-digit Minutes |
(00 to 59) |
| 4. Enter 2-digit Month |
(01 to 12) |
| 5. Enter 2-digit Day |
(01 to 31) |
| 6. Enter 2-digit Year |
(00 to 99) |
| 7. Keypad will beep and exit |
|
| View Time |
# 7 (LCD keypads only) |
| Siren Test |
There is no Siren Test |
