| If Master Code is lost the panel must be downloaded or set for Service |
| Master Code |
User 01 |
| Secondary Codes |
User 02 to 15 |
| Hostage Code |
User 16 (May not be enabled) |
|
| Add Code |
| 1. |
Press CODE key |
| 2. |
Enter Master Code then User (01 to 16) |
| 3. |
Enter User (01 to 16) again then enter New User Code |
| 4. |
Enter New Code again |
| 5. |
Enter User Level (1 to 4)
| 1 – |
Arm, Disarm, Bypass, programs other Codes |
| 2 – |
Arms, Disarm, Bypass (Normally use this for secondary Codes) |
| 3 – |
Arms only |
| 4 – |
Disarm Only (Temporary User) |
|
| 6. |
Enter User Level (1 to 4) again |
| 7. |
Press * to exit
(Example: User Code 3 to 4667, press CODE + Master Code + 03 03 4667 4667 2 2* )
|
|
| Delete Code |
| 1. |
Press CODE key |
| 2. |
Enter Master Code |
| 3. |
Enter User (01 to 16) to delete |
| 4. |
Press # |
| 5. |
Press * to exit
(to delete Code 3 press CODE + Master Code + 03 + # + * )
|
|
| If a mistake is made entering commands keypad will beep 4 times
|
