DTI Sears 665 670 Basics

DTI Sears 665 / 670 Basics

System programs with a Napco 410 Chip Programmer
Zones	7 + 1 fire zone
Resistors	4.7k
Fuses	3 Amp
Battery	12 volt rechargeable Gel-Cell inside main panel
Wireless	No
Downloadable	Not sure
Panic Buttons	Police, Fire and Medical
Arm	Enter 4-digit code (Must have READY light)
Quick-Arm	(If Enabled) Press 0
Instant Arm	Not available with this system
Disarm	4 digit code
Silence Alarm	4-digit code
Bypass	Press # 1 to display zone status, press zone # to bypass (1 to 8), then press # 0
Alarm Memory	Press # 2 to display last alarm, press # 0 to exit Or Press # 3 Light 1 = Fire Zone Alarm Light 2 = Duress Code Activated Light 3 = Fire Panic Activated Light 4 = Medical Panic Activated Light 5 = Police Panic Activated Light 6 = Low Panel Battery Light 7 = AC Power Loss Press # 0 to exit
Reset	# 8
Door Chimes	Not available with this system
Phone Test	# 7, TRANSMIT light will turn on, flash if test failed
Sensor Test	# 4, alarm will sound briefly if a zone is violated, press # 0 to exit