DSC PC 5020 / Power864 Partitions

Single Partition
Keypads
(Partitioned Keypads can be programmed to work only with specific partition)
To view another partition hold # for 3 seconds then 1 to 8 (for Partition 1 to 8) for 3 seconds
Global Partition
Keypads
(Global Keypads work with all partitions)
To view another partition press and hold 1 to 8 for Partition 1 to 8 until Keypad beeps
(until you select a partition the keypad will appear to be dead)
Partition Panel 1. Turn on light 1 to 8 in 201 to enable Partition 1 to 8
2. Turn on lights in 202 to 209 for which zones are assigned to Partition 1
3. Turn on lights in 210 to 217 for which zones are assigned to Partition 2
4. Turn on lights in 218 to 225 for which zones are assigned to Partition 3
5. Turn on lights in 226 to 233 for which zones are assigned to Partition 4
6. Turn on lights in 234 to 241 for which zones are assigned to Partition 5
7. Turn on lights in 242 to 249 for which zones are assigned to Partition 6
8. Turn on lights in 250 to 257 for which zones are assigned to Partition 7
9. Turn on lights in 258 to 265 for which zones are assigned to Partition 8
10. Program Account number in 310 for Partition 1, and 311 for Partition 2 etc
11. Turn on light 1 in 351 to 358 to send Partition 1 to 8 Alarms to Telephone 1
12. Turn on light 1 in 359 & 366 to enable Partition 1 to 8 Restorals to Telephone 1
Partition Keypad 1. Enter regular programming mode
2. Press 000 to enter keypad Programming
3. Press 0 for Partition and Slot programming then enter 2 digit Partition & Slot

1st digit 0 = Global Keypad
1 = Keypad assigned to Partition 1
2 = Keypad assigned to Partition 2
3 = Keypad assigned to Partition 3
4 = Keypad assigned to Partition 4
5 = Keypad assigned to Partition 5
6 = Keypad assigned to Partition 6
7 = Keypad assigned to Partition 7
8 = Keypad assigned to Partition 8
2nd digit Supervision Slot 1 to 8

(Assign one LCD keypad Slot 8 to allow programming of Zone Description by downloading)
4. Press # to go back to panel programming, press 902 and wait for 2 minutes
5. Press # again to leave programming

Partition
User Codes
01 to 32 = Regular Users
33 to 34 = Hostage
40 = Master Code
41 = Master Code for 1st Partition
42 = Master Code for 2nd Partition
If LCD Keypad 1. Press * 5 + Master Code to enter User Code programming
2. Press 9 to enter Code Attributes
3. Use < or > keys to select user (01 to 42) then press *
  OR
4. Enter 01 to 32 (no need to press * with this method)
5. Use 1, 2, 3, 4 keys to toggle options

    1 = 1st Partition Yes/No (Yes if for Partition 1)
2 = 2nd Partition Yes/No (Yes if for Partition 2)
3 = 3rd Partition Yes/No (Yes if for Partition 3)
4 = 4th Partition Yes/No (Yes if for Partition 4)
5 = 5th Partition Yes/No (Yes if for Partition 5)
6 = 6th Partition Yes/No (Yes if for Partition 6)
7 = 7th Partition Yes/No (Yes if for Partition 7)
8 = 8th Partition Yes/No (Yes if for Partition 8)

6. Press # to return to regular User Code programming and go to step 2 for next code

If LED Keypad 1. Press * 5 + Master Code to enter code programming
2. Press 9 to enter Code Attributes
3. Enter User number (01 to 42)
4. Use 1, 2, 3, 4 keys to toggle LED’s On/Off

    Light 1 = 1st Partition Enable (ON if for Partition 1)
Light 2 = 2nd Partition Enable (ON if for Partition 2)
Light 3 = 3rd Partition Enable (ON if for Partition 3)
Light 4 = 4th Partition Enable (ON if for Partition 4)
Light 5 = 5th Partition Enable (ON if for Partition 5)
Light 6 = 6th Partition Enable (ON if for Partition 6)
Light 7 = 7th Partition Enable (ON if for Partition 7)
Light 8 = 8th Partition Enable (ON if for Partition 8)

5. Press # to return to regular User Code programming and go to step 2 for next code