1. Home
  2. Caddx
  3. Caddx NX6
  4. Caddx NX6
 

Caddx NX-6 Wiring

Zones 16 Hardwired or Wireless
Batteries
Main Panel 12 volt rechargeable Gel-Cell
AC Transformer 16.5 volts
Door/Windows 4.5 volt Alkaline
Motion Sensor 3.6 volt Lithium
Smoke Detector 2 9 volt Alkaline
4-button Keyfob 3.6 volt Lithium
Pendant Panic 3.6 volt Lithium
Downloadable Yes
Partitions 2
Panic Buttons Police, Fire and Medical
Arm AWAY 4 digit code or press EXIT Button (EXIT Light turns ON)
Arm STAY 4 digit code + STAY (EXIT, STAY, BYPASS turns ON)
Quick Arm Press EXIT Button to arm Away, STAY Button if arming in Home Mode
Instant Arm Arm system with STAY Button or User Code + STAY and press STAY again
Partition Arm Enter User Code + Partition (1 to 8) (Muliple partitions press 1, 2, 3 etc)
or Enter User Code + DOWN Arrow
Disarm 4 digit code (If wrong code entered keypad beeps 3 times, try again)
Partition Disarm Enter User Code + Partition (1 to 8) (Muliple partitions press 1, 2, 3 etc)
or Enter User Code + UP Arrow
Move to Partition 1. User Code + * + Partition (1 to 8) + # (Display shows status of Partition)
2. Press # to exit back to original Partition
Cancel Button Enter Code + CANCEL Button to stop signal to monitoring station
Bypass 1. Press BYPASS
2. Enter User Code if required (BYPASS Light will Flash)
3. Enter Zone to Bypass (1 to 40)
4. Press BYPASS Button again (Bypassed Zone turns ON)
5. Enter next Zone to Bypass or # to exit
Group Bypass (If enabled) BYPASS + 0 + BYPASS (Bypasses several motions)
Alarm Memory Press * + 3, last Alarm will flash, press # to exit
Event History
(LCD Keypads) 		1. Press * 90 (Keypad prompts for Master Code)
2. Enter Master Code (Keypad shows last event)
3. Press UP and DOWN Arrows to scroll (Down scrolls back through history)
4. Press # to exit
Smoke Reset Press * 7
(If Smoke still sounds power down system, Smoke detector is bad)
Door Chimes Press CHIME Button to enable/disable (CHIME light turns ON)
System Test Press * 4 to test Battery, Communicator and/or Siren
Change Partition Press * + 1 + Partition 1 to 8 (Works for 60 seconds)
Setting Time 1. Press * + 9 + 7 + Master Code
2. Enter 2-digit Hour (01 to 23)
3. Enter 2-digit Minute (01 to 59)
(Example: 1:30 PM would be entered as 1330)
Setting Date 1. Press * + 9 + 6 + Master Code
2. Enter Day (1 = Sunday to 7 = Saturday)
3. Enter 2 digit Month (01 = January to 12 = December)
4. Enter 2 digit Day (01 to 31)
5. Enter 2 digit Year (2000 = 00)
(Example: Sunday January 23rd 2000 would be 1 01 23 00)
Keypad Volume 1. Press * + 0, keypad begins beeping
2. Press 1 to raise Tones, 2 to lower Tones
3. Press # to exit