Caddx 9000 / 9000E Basics
| Zones | 32 Hardwire or Wireless Zones (Usually all Hardwired) | ||||||
| Battery | 12 volt rechargeable Gel-Cell inside main panel | ||||||
| Wireless | Yes, up to 100 Wireless zones | ||||||
| Panic Buttons |
|
||||||
| Downloadable | Yes, customer must be home to activate download | ||||||
| Arm Enter | 4-digit code (MUST have a green READY light) | ||||||
| Disarm | 4-digit code, if incorrect code is entered wait 2 seconds and try again | ||||||
| Instant Arm | Press * after arming, INSTANT light will turn on | ||||||
| Quick-Arm | Enter Quick Arm Digit (If enabled by Installer) | ||||||
| Bypass | * + Zone (01 to 32) + * | ||||||
| Alarm Memory |
LED keypads – Press 0 and wait 5 seconds, last alarm will display LCD keypads – Press D + 0 for last alarms, A key scrolls through last 12 alarms Press # to exit |
||||||
| Event Buffer |
LCD Keypads only 1. Press C + 9 + 8 + Master Code 2. Keypad will prompt for date to start viewing enter date or press # to move through events 3. Press # to exit |
||||||
| Smoke Reset |
Enter 4-digit code to silence alarm + # to reset Smoke (If this does NOT reset smoke detector set for service, smoke is bad) |
||||||
| Door Chimes | Press and hold the chime digit for 5 seconds. (The chime digit is determined in programming, location 244. Default is “1”) | ||||||
| Siren Test | Press 1 & 7 at same time, turn off siren with User Code | ||||||
| Set Clock |
LCD Keypads only 1. Press C + 7 + Master Code 2. Keypad will show “Enter Day of Week” press 1 for Sunday, 2 for Monday etc 3. Keypad will show “Month/Day/Year”, enter 2 digit Month, Day and Year Example: July 2 1999 would be 070299 4. Enter Time in Military time (03:15PM would be 1515) 5. Press # to exit |
||||||
| Other Options |
Press B + 9 to turn off Keypad LED’s Press B + 7 to turn off Keypad Backlighting Press B + 0 to turn off Both |