1. Home
  2. Caddx
  3. Caddx 8600E
  4. Caddx 8600E
 

Caddy 8600E Program

* Caddx 8950 Programmer is required if Installer Code has been Changed *
Download Info Have tech press * 9 # while phone is ringing
Enter Program
  • If using Programmer plug into program terminal on panel
  • If keypad programming enter 9713 (default)
  • LCD Keypad Press C 0 0, press 2 to select Panel Programming
  • (If asked what panel “1=8900, 2=Aust, 3=Other” select 3 for Other)
Factory Default 910 #
Go to Location Location + #
Enter Data Enter data + * + # to save and move to next location
Example: Master Code in 0 to 3 is entered as 1* # 2 * # 3* # 4* #
Exit Program If using 8950 Programmer save data with 920# and unplug from panel
If using keypad save with 920# and exit with 930#
Zone Page 4*2 Std Click HERE for List of what below programming will report
Hex Program A = 10 B = 11 C = 12 D = 13 E = 14 F = 15
Location Description Value
0-3 User 1 Master Code I_1_I_2_I_3_I_4_I
4-7 User 2 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
8-11 User 3 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
12-15 User 4 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
16-19 User 5 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
20-23 User 6 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
24-27 User 7 Hostage Code I_2_I_5_I_8_I_0_I (F (15) = Disabled)
28-31 User 8 Installer Code I_9_I_7_I_1_I_3_I (Default)
32-39 Primary Phone Number Digits 1-8 I_F_I_1_I_8_I_?_I_?_I_?_I_?_I_?_I
40-47 Primary Phone Number Digits 9-16 I_?_I_?_I_?_I_?_I_0_I_0_I_0_I_0_I
A (10) if any 0’s in number or to end number
F (15) = Touch Tone Dial
D (13) = 4 second pause
48-51 Primary Account Number (Last 4 of Account) I_?_I_?_I_?_I_?_I
Use 10’s if 0 is in Account
52 Primary Format I_E_I (E = 14)
0 = Communicator (Disabled)
1 = Universal 4/2 1800 Transmit, 2300 Handshake 40PPS
2 = Ademco/Silent Knight Fast 1900 Transmit, 1400 Handshake 20 PPS
3 = Caddx Modem (Proprietary
4 = Sescoa Superfast 1800 Transmit, 2300 Handshake 4/2
5 = Extended Radionics Slow 1800 Transmit, 2300 Handshake 20PPS
6 = Extended Radionics Slow 1800 Transmit, 1400 Handshake 20PPS
7 = Extended Radionics Fast 1800 Trasmit, 2300 Handshake 40PPS
8 = Extended Radionics Fast 1800 Transmit 1400 Handshake 40PPS
9 = Extended Radionics Fast w/Parity 1800 Transmit, 2300 Handshake 40PPS Ext
A (10) = Extended Radionics Fast w/Parity 1800 Transmit, 1400 Handshake 40PPS
B (11) = Ademco 4/2 Express (DTMF)
C (12) = Silent Knight 4/2 Fast 1900 Transmit, 1400 Handshake 20PPS
D (13) = Ademco Contact ID (DTMF)
E (14) = SIA (FSK)
F (15) = Pager/Custom Format (See Over-Ride Locations 182, 183, 208, 209)
53 Secondary Number as Backup I_0_I (Disabled)
54-61 Secondary Number Digits 1-8 I_0_I_0_I_0_I_0_I_0_I_0_I_0_I_0_I
62-79 Secondary Number Digits 9-16 I_0_I_0_I_0_I_0_I_0_I_0_I_0_I_0_I
70-73 Secondary Account Code I_0_I (Disabled)
74 Secondary Format I_0_I (Disabled)
75 Entry Time 1 (10 second) I_3_I (0 to 150 (F) seconds)
76 Exit Time 1 (10 second) I_6_I (0 to 150 (F) seconds)
77 Siren Shutdown (X2 Min) I_4_I (8 Minutes)
78 Zone 1 Type I_?_I (1 = Day Zone)
(2 = 24 Hour Zone)
(3 = Entry/Exit)
(4 = Interior Delay)
(5 = Interior Follower)
(6 = Instant/Perimeter)
(7 = 24 Hour Silent)
(8 = Priority/Smoke Det)
(9 = Secondary Delay)
(10 = Supervisory 24 Hr Silent)
79 Zone 2 Type I_?_I
80 Zone 3 Type I_?_I
81 Zone 4 Type I_?_I
82 Zone 5 Type I_?_I
83 Zone 6 Type I_?_I
84 Reserved
85 Reserved
86-87 Duress Code I_0_I_A_I (Set for SIA reporting)
88-89 Fire Panic Report Code ( 1 & 3 ) I_0_I_1_I (Set for SIA reporting)
90-91 Med Panic Report Code ( 4 & 6 ) I_0_I_B_I (Set for SIA reporting)
92-93 Police Panic Report Code (* & # ) I_0_I_2_I (Set for SIA reporting)
94-95 Tamper Report Code I_0_I_0_I (00 = Disabled, if needed use 5C)
(If enabled also locks keypad for 1 minute after 30 random keypresses)
96-97 “Downloading Complete” Report I_0_I_0_I (00 = Disabled, If needed use 11)
98-99 Test Report Code I_0_I_0_I (00 = Disabled, If needed use 11)
100-101 Failure To Communicate Report I_0_I_0_I (00 = Disabled, If needed use 11)
102 Closing Report Code I_0_I (0 = Disabled, If needed use 1)
103 Opening Report Code I_0_I (0 = Disabled, If needed use 1)
104-105 Zone 1 Report Code I_1_I_0_I (Set for SIA reporting)
106-107 Zone 2 Report Code I_2_I_0_I (Set for SIA reporting)
108-109 Zone 3 Report Code I_3_I_0_I (Set for SIA reporting)
110-111 Zone 4 Report Code I_4_I_0_I (Set for SIA reporting)
112-113 Zone 5 Report Code I_5_I_0_I (Set for SIA reporting)
114-115 Zone 6 Report Code I_6_I_0_I (Set for SIA reporting)
116-119 Reserved I_ _I_ _I (Do not Program)
120-121 AC Power Loss Report Code I_1_I_1_I (Set for SIA reporting)
122-123 Low Battery Report Code I_1_I_1_I (Set for SIA reporting)
124 Trouble Report Code (Fire) I_1_I (Sends 76 if Smoke Trouble)
125 Zone Bypass Report Code I_0_I (0 = Disabled, if needed use 1)
126 Restore Report Code I_0_I (0 = Disabled, If needed use 1)
127 Cancel Report Code I_1_I (0 = Disabled, If needed use 1)
128 Communicator Abort I_0_I (0 = Disabled)
(1 = Enabled)
(Ends comm if disarmed after alarm)
129 Keypad Holdup/Panic Audible I_0_I (0 = Audible Panic)
(1 = No Siren Output)
(2 = No Siren or Keypad Output)
130 Number of Alarms before Swinger
(1 to 8 Alarms before Swinger) 		I_3_I (0 = Disabled)
131 Auto Bypass/Instant Arm I_0_I (0 = (Disabled)
(1 = Inst Doors/No Pir)
(3 = Delay Doors/No Pir)
132 Siren Driver I_1_I (0 = Internal Siren Driver)
(1 = External Siren Driver)
(If using Exterior Siren set panel jumper to VOLTAGE)
(If using internal Siren Driver set panel jumper to SIREN)
133 Keypad LED Extinguish I_0_I (0 = Disabled)
(1 = LED’s off after 60 sec)
134 Dial Attempts I_8_I (1 to 8 Attempts)
135 Power Up Condition I_0_I (0 = Last Condition)
(1 = Power Up Disarmed)
(2 = Power Up Armed)
136 (Zone) Power Up Delay I_0_I (0 = No Delay on Power Up)
(1 = 60 Sec Power Up Delay)
137 Immediate Restore By Zone I_0_I (0 = Restore at Siren Timeout)
(1 = Restore immediate)
138 No Arming With a Zone Bypassed I_0_I (0 = Enabled)
(1 = No Arming if Zone Bypassed)
(8 = No Keypad Beeps if AC Fail)
139 Quickarm Digit I_0_I I_0_I (0 = Quickarm Disabled)
(1 to 9 Quickarms system)
(Do not use a digit that conflicts with Installer Code!)
140 Priority Siren Cutoff Inhibit I_0_I (0 = Shutdown at Siren Timeout)
(1 = Siren until Code Disarm)
141 Special Keypad Commands
(Actions by pressing Master + *) 		I_0_I (0 = Disabled)
(1 = Restart Exit Delay)
(2 = Interior Bypass/Unbypass)
(4 = Unbypass Interior Zones)
(8 = Remote Arm Pins to Panic)
142 Siren/Bell Test I_0_I (0 = Disabled)
(1 = Keypad 1 & 7 is Siren Test)
(2 = Siren upon Arming)
(4 = Siren after Exit Delay)
(8 = Siren at Kissoff Ringback)
143 Smoke Detector Power Reset I_1_I (0 = Disabled
(1 = Smoke Power Reset with #)
(2 = 2 trips before Activation)
144 European Pulse Dial Ratio I_0_I (0 = Disabled)
(1 = Enabled)
145 Auxiliary Output 1_ I_0_I (Armed)
146 Auxiliary Output 2 I_1_I (Ready)
147 Auxiliary Output 3 I_2_I (Burg Siren)
148 Auxiliary Output 4 I_3_I (Fire Siren)
149 Auxiliary Output Inversion I_1_I (1 = Invert Auxiliary 1 Output)
(2 = Invert Auxiliary 2 Output)
(4 = Invert Auxiliary 3 Output)
(8 = Invert Auxiliary 4 Output)

150 AC Power Loss Delay I_F_I (0 = No AC Report Delay)
(1 to F Delay x2 minutes)
151 Rings to Answer Download I_8_I (0 = Downloading Disabled)
(1 to 8 Rings before answer)
152 Days Left Until Autotest Report I_0_I (0 = Autotest sends normally)
(1 to F Days until first Autotest)
153 Current Month I_?_I (0 to 12)
154 Current Year – Tens Digit I_?_I (0 to 9, if 2001 enter 0)
155 Current Year – Ones Digit I_?_I (0 to 9, if 2001 enter 1)
156 Current Day – Tens Digit I_?_I (0 to 3, if 31st enter 3)
157 Current Day – Ones Digit I_?_I (0 to 9, if 31st enter 1)
158 Current Hour – Tens Digit I_?_I (0 to 12, if 17:25 enter 1)
159 Current Hour – Ones Digit I_?_I (0 to 9, if 17:25 enter 7)
160 Current Minutes – Tens Digit I_?_I (0 to 5, if 17:25 enter 2)
161 Current Minutes – Ones Digit I_?_I (0 to 9, if 17:25 enter 5)
162 Autotest Report Hour – Tens Digit I_0_I (0 to 12, if 02:00 enter 0)
163 Autotest Report Hour – Ones Digit I_2_I (0 to 9, if 02:00 enter 2)
164 Autotest Report Mins – Tens Digit I_0_I (0 to 5, if 02:00 enter 0)
165 Autotest Report Mins – Ones Digit I_0_I (0 to 9, if 02:00 enter 0)
166 Autotest Report Days I_0_I (0 = Disabled)
(1 to F = 1 to 15 Days)
167 Rotating Maintenance Code I_0_I (Disabled)
168 Complex/Seed Code Digit 1 I_0_I
169 Complex/Seed Code Digit 2 I_0_I
170 Complex/Seed Code Digit 3 I_0_I
171 Complex/Seed Code Digit 4 I_0_I
172 User 7 Open Rprt I_0_I (Disabled)
173 User 7 Close Rprt I_0_I (Disabled)
174 Zones 3-6 EOL Resistor Defeat I_0_I (Zones 2, 4, 5 & 6 use EOL)
1 = Zone 6 Normally Closed
2 = Zone 5 Normally Closed
3 = Zone 5 & 6 Normally Closed
4 = Zone 4 Normally Closed
5 = Zone 4 & 6 Normally Closed
6 = Zone 4 & 5 Normally Closed
7 = Zone 4, 5 & 6 Normally Closed
8 = Zone 3 Normally Closed
9 = Zone 3 & 6 Normally Closed
10 (A) = Zone 3 & 5 Normally Closed
11 (B) = Zone 3, 5 & 6 Normally Closed
12 (C) = Zone 3 & 4 Normally Closed
13 (D) = Zone 3, 4 & 5 Normally Closed
14 (E) = Zone 3, 4 & 5 Normally Closed
15 (F) = Zone 3, 4, 5, 6 Normally Closed
175 Zones 1-2 EOL Resistor Defeat I_0_I (Zones 1 & 2 use EOL)
1 = Zone 2 Normally Closed
2 = Zone 1 Normally Closed
3 = Zone 2 & 1 Normally Closed
176 Tmpr, DL Cmplt, test, Split Rprt I_0_I (0 = All to Phone 1)
177 AC Fail, Low Batt, O/C, Split Rprt I_0_I (0 = All to Phone 1)
178 Secondry Entry Time (x10 secs) I_3_I (0 to 150 (F) seconds)
179 Secondry Exit Time (x10 secs) I_6_I (0 to 150 (F) seconds)
180 Loop Response Time I_0_I (0 = 500, 1 = 20, 5 = 100ms)
181 Autotest Suppression I_0_I
182 Format Over-Ride I_0_I (0 = Disabled)
(1 = Extended Reporting)
(2 = Hex Digits Allowed)
(4 = 20PPS)
(8 = 10PPS)
183 Format Over-Ride I_0_I (0 = Disabled)
(1 = 1800Hz Transmit)
(2 = 2300Hz Handshake)
(4 = Single Round Parity)
(8 = 2-digit Event Code)
184-185 Reserved I_ _I_ _I (Do not Program)
186 Zone 1 Special Character I_E_I (1 = Fast Loop)
187 Zone 2 Special Character I_E_I (2 = Bypass Capability)
188 Zone 3 Special Character I_E_I (4 = Zone Restoral)
189 Zone 4 Special Character I_E_I (8 = Chime Enabled)
190 Zone 5 Special Characteristics I_E_I (E = All but Fast Loop Enable)
191 Zone 6 Special Characteristics I_E_I
192-193 Reserved I_ _I_ _I (Do not Program)
194 Telephone Line Fault I_0_I (0 = Disabled)
(1 = Siren Activation)
(2 = Keypad Sounder)
(3 = Keypad & Siren Sounder)
195 Phone Line Fault Delay I_6_I (0 = Instant)
(1 to 15 = 10 to 150 seconds)
196 Answering Machine Defeat I_1_I (0 = Disabled)
(1 to 3 Rings Double Call)
197 Force Arming Enable I_0_I (0 = Disabled)
(1 = Force Arm Enabled)
(2 = Instant Zones w/Arming)
198 Auto Arming, Hour – Tens Digit I_0_I (0 to 12, if 18:00 enter 1)
199 Auto Arming, Hour – Ones Digit I_0_I (0 to 9, if 18:00 enter 8)
200 Auto Arming, Min – Tens Digit I_0_I (0 to 6, if 18:00 enter 0)
201 Auto Arming, Min – Ones Digit I_0_I (0 to 9, if 18:00 enter 0)
202 Automatic Arming Enable I_0_I (0 = Disabled)
(1 = Enabled)
203 Battery Test Current in Minutes I_0_I (0 = Disabled)
(1 to 15 minute test)
204 Dual Rep Tmpr, Dwnld Complete I_0_I (0 = Disabled)
205 Dual Rep AC Fail, Bat, O/C/Maint I_0_I (0 = Disabled)
206 Dual Report all I_0_I (0 = Disabled)
(1 to Both Phone #’s)
207 Callback Phone Number Control I_0_I (0 = Disabled)
(1 = Callback Enabled)
(2 = * 8 # Download Enabled)
(4 = Callback at Autotest Time)
208 Format Over-Ride I_0_I (0 = Disabled)
(1 = Pager Format)
(2 = Ademco Handshake)
(4 = Caddx Modem)
(8 = Sescoa Superfast)
209 Format Over-Ride I_0_I (0 = Disabled)
(1 = Contact ID)
(2 = SIA)
(4 = 4/2)
(8 = DTMF Pager)
210 Exit Error Report Code I_0_I (If needed use 1)
211 Recent Closing Report Code I_0_I (If needed use 1)
212-215 User 8 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
216-219 User 9 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
220-223 User 10 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
224-227 User 11 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
228-231 User 12 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
232-235 User 13 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
236-239 User 14 Arm/Disarm Code I_F_I_F_I_F_I_F_I (F (15) = Disabled)
240 Dial Attempts to Phone 2 I_0_I (0 = Disabled)
(1 to 8 Attempts)
241 Listen-In Time I_3_I (1 = 30 seconds)
(3 = 90 seconds)
242 Reserved I_ _I (Do not Program)
243 Entry/Keypad Sounder I_0_I (0 = Disabled)
(12 = Output 1 Entry Sounder)
244 Zone 1 Special Characteristics I_8_I (1 to F (15))
245 Zone 2 Special Characteristics I_8_I (1 = Cross Zone)
246 Zone 3 Special Characteristics I_8_I (2 = Entry Gard Zone)
247 Zone 4 Special Characteristics I_8_I (4 = Group Bypass Zone)
248 Zone 5 Special Characteristics I_8_I (8 = Trouble Reporting)
249 Zone 6 Special Characteristics I_8_I
250-251 Reserved I_ _I_ _I (Do not Program)
252-253 Auxiliary 3 Report Code (7 & 9) I_0_I_0_I (0 = Disabled, 1 to F)
254 User On-Site Report Code I_0_I (0 = Disabled, 1 to F)
255 Cross-Zoning Current (Minutes) I_5_I (1 to 15 (F) minutes)
Exit Programming If using 8950 Programmer SAVE data with 920# and unplug from panel
If using keypad SAVE with 920# and EXIT with 930#
Below Locations can only be programmed by downloading
256-263 Control Panel Access Code I_8_I_6_I_0_I_0_I_0_I_0_I_0_I_0_I
264-271 Callback Phone Digits 1 – 8 I_0_I_0_I_0_I_0_I_0_I_0_I_0_I_0_I
272-279 Callback Phone Digits 9 – 16 I_0_I_0_I_0_I_0_I_0_I_0_I_0_I_0_I
280 Answering Machine Defeat I_1_I (0 = Disabled)
(1 = 1 Ring/Hang/Ring)
281 Local Programming Lockout I_0_I (0 = Not Locked)
(0 = Keypad Program Enable)
(5 = No Local Programming)
(A = Communication Locked)
282 Control Panel Shutdown I_0_I (0 = System On)
(A = System Shutdown)