1. Home
  2. Bosch Radionics
  3. Bosch Radionics
  4. Bosch Radionics
 

Bosch Radionics DS7400XI Program

Enter Program 9 8 7 6 5 + # + 0 (Keypad lights should start flashing)
Move to location 2-digit location + # + enter Data + #
Exit Program Hold * for2 seconds
Answer DL User Code + # + 8 + 6
Send To DL User Code + # + 8 + 3
Hex Program A = *0 B = *1 C = *2 D = *3 E = *4 F = *5
Line Swing
4028# Phone Number 1 (30 digits) |___|___|___|___|___|___|___|___|___|___|_#_|
4038# Phone Number 2 (30 digits) |___|___|___|___|___|___|___|___|___|___|_#_|
0496# Account Code 1 (4 digits) |___|___|___|___|_#_| B = * + 1

C = * + 2

D = * + 3

E = * + 4

F = * + 5

0498# Account Code 2 (4 digits |___|___|___|___|_#_|
0529# Communicator Format 1 |_9_|_1_|_#_| Contact ID |_*0 _|_1_|_#_| SIA
0530# Communicator Format 2 |_9_|_1_|_#_| Contact ID |_*0 _|_1_|_#_| SIA
0528# Download Number 3 (15 digits) |_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_0_|_#_|
0532# Installer Programmer Code |_9_|_8_|_7_|_6_|_5_|_#_|
15 User Codes (May be either 4 or 6 digits depending how Installer programmed panel)
Master Code 001
Hostage Code (Any Code can be a Duress Code)

Change User 1. Enter Master Code + # + 0 + 0

2. Enter User (001 to 090)
3. Enter Authority Level (0 to 6)
0 = Master Code
1 = Unlimited (arms, disarms, cannot change codes)
2 = General Code (This is a standard User Code)
3 = Arm only Code
4 = Temporary Code (deletes after 15 days)
5 = Duress Code
6 = Access Code (if programmed operates a door)
4. Enter Partition this code is for (1 = Partition 1, 2 = Partition 2, 3 = Both)
5. Enter new User Code
6. Enter new User Code again then # to save and exit
Delete User 1. Enter Master Code + # + 0 + 0
2. Enter User (002 to 090)
3. Press #
4. Press # to save and exit

User Functions
Partitions 8
Wireless No
Panic Buttons Police, Fire and Medical
Arm Away User Code + ON
Stay Arm User Code + PERIMETER ONLY
Instant Arm User Code + NO ENTRY + PERIMETER ONLY
Custom Arm User Code + # + 4 (Arms only certain sensors)
Quick Arm(if Available) Arm Away = # + ON
Arm Stay = # + PERIMETER ONLY
Arm Instant = # + NO DELAY + PERIMETER ONLY
Disarm User Code + #
Bypass User Code + BYPASS + Zone (1 to 128)
Clear Bypass User Code + BYPASS + *
Force Arm User Code + ON or PERIMETER ONLY + BYPASS (Arms with Zones Open)
Reset Smoke User Code + SYSTEM RESET
Reset Zones User Code + SYSTEM RESET
Change
Partition 		User Code + # + #
Door Chimes User Code + # + 7
Alarm History User Code + # + 8 + 9, scroll events with #
Clear Memory User Code + OFF + User Code + SYSTEM RESET
Zone Test 1. User Code + # + 8 + 1
2. Open Zones (Zone lights flash on untested zones)
3. User Code + # exits
Battery Test User Code + SYSTEM RESET
Siren Test User Code + # + 8 + 5
Phone Test User Code + # + 8 + 2
Set Date 1. Master Code + # + 0 + 2
2. Enter Month (01 = January to 12 = December)
3. Enter Day (01 to 31)
4. Enter Last 2 digits of Year (2000 = 00)
5. Press # to save and exit
Set Time 1. Master Code + # + 0 + 6
2. Enter Day (1 = Sunday to 7 = Saturday)
3. Enter Time in Military Format (0100 to 1259)
4. Enter 4 if AM or 6 if PM
5. Press # to save and exit
Read Time Master Code + # + 0 + 6 + # (LCD Keypads only)