Bosch Radionics D8112 Basics
| Zones | 8 to 128, hardwired, some wireless |
| Battery | 12 volt rechargeable Gel-Cell inside main panel |
| AC Transformer | 16.5 volts, screwed into outlet somewhere in house |
| Wireless | No |
| Downloadable | Yes (Customer does not have to be avaible) |
| Remote Arm | Yes |
| Remote Disarm | No |
| Panic | COMMAND + 9 (This may be silent on some systems) |
| Special Alert | COMMAND + 7 to send a specific alarm (Optional) |
| Arm Away | Enter Code or COMMAND + 1 (All zone lights must be Off to arm) |
| Arm Home | COMMAND + 3 (Perimeter Light will turn on) |
| Stay Arm | COMMAND + 3 (Motions are bypassed, doors/windows will still be delayed) |
| Instant Arm | COMMAND + 2 (Perimeter & Instant lights will turn on, motions will not Arm) |
| Partial Arm | COMMAND + 8 (Arms all but open zones and bypasses motions) |
| Disarm | Enter Code (Perimeter, Interior and Instant lights will turn off) |
| Reset Alarm | Press COMMAND + 4 to stop keypad flashing and reset system |
| Reset Smoke |
COMMAND + 4 + 7 (If this does not work power down system and set for service) |
| Bypass |
1. Arm system with User Code or COMMAND + 1 2. Before Exit Delay expires press COMMAND 3. Press zone to be bypassed (1, 2, 3 etc) (Bypassed zones may turn on if closed) (Bypassing can be enabled or disabled per system. May require service) |
| Force Bypass |
(Bypassing an already open zone) 1. Arm system with either User Code or COMMAND + 1, 2 or 3) 2. Keypad begins beeping, press last digit of User Code for 5 to 10 seconds (Bypassed zones may turn on if closed) (Bypassing can be enabled or disabled per system. May require service) |
| Door Chimes | COMMAND + 6 to turn On or Off |
| Alarm Memory | Zone Light will flash rapidly |
| Phone Test | COMMAND + 4 + 1 (If Phone test is good system will sound 2 second tone) |
| System Test | Press COMMAND + 4 + 4, press any key to end test |
| System Status | Press COMMAND + 4 + 2, this will send a report showing the current status of alarm |
| Download Ans |
Press COMMAND + 4 + 3 while the phone is ringing. This will cause the alarm panel to answer for download. (Code may be required) |