Bosch Radionics D6112 Codes

User Codes can be 3 or 5 digits in length.
The 1st digit of User Code will be the user number.
Do not make last digit 0 if using duress code
Duress Code One number above any User Code

Change Code (Customer may change an existing code but cannot add a new one)
1. Press COMMAND + 5 (The COMMAND light will turn on)
2. Enter User Code you want to change + ENT key
3. Enter the new User Code + ENT key
4. Enter new User Code again + ENT key (The COMMAND light will turn off)