Bosch Radionics D6112 Basics

Zones 6 Hardwired
Battery 12 volt rechargeable Gel-Cell inside main panel
AC Transformer 16.5 volts, screwed into outlet somewhere in house
Wireless No
Downloadable Yes – Customer must be home and needs to answer the phone
Event Log No
Panic COMMAND + 9 (This may be silent on some systems)
Special Alert COMMAND + 7 (sends specific alarm (Optional))
Arm Away Enter Code + ENT key or COMMAND + 1 (All zone lights must be Off to arm)
Stay Arm COMMAND + 3 (Motions are bypassed, doors/windows will still be delayed)
Instant Arm COMMAND + 2 (Perimeter & Instant lights turn on, Motions will not arm)
Partial Arm COMMAND + 8 (Arms all but open zones, bypasses motions)
Disarm Enter Code + ENT key (Perimeter, Interior, Instant turn off)
Reset Alarm Press COMMAND + 4 to stop keypad flashing and reset system
Reset Smoke COMMAND + 4 + 7
(If this does not work power down system and set for service)
Bypass 1. Arm system with COMMAND + 1
2. Before Exit Delay expires press COMMAND + 0
3. Press zone to be bypassed (1, 2, 3 etc) + ENT key
4. Press ENT to end and allow system to finish arming
(Bypassed zones will flash slowly on display)
Force Bypass 1. Open door or window
2. Arm system with either User Code + ENT or COMMAND + 1, 2 or 3)
3. Keypad beeps indicating Zone is open
4. Press COMMAND + ENT to force bypass
(A forced bypassed zone may arm with rest of system if closed)
Door Chimes COMMAND + 6 to turn On or Off
Alarm Memory There is no Alarm Memory
Phone Test COMMAND + 4 + 1 (If Phone test good system sounds 2 second tone)
System Test COMMAND + 4 + 4 (Press any key to end test)