Bosch Radionics D4112 Codes
| User Codes |
Can be 3 or 5 digits in length. The 1st digit of User Code is the user number. Do not make last digit 0 if using duress code |
| Duress Code | One number above any User Code |
|
|
|
| Change Code |
(Customer may change an existing code but cannot add a new one) 1. Press COMMAND + 5 (The COMMAND light will turn on) 2. Enter User Code you want to change + ENT key 3. Enter the new User Code + ENT key 4. Enter new User Code again + ENT key (The COMMAND light will turn off) |