1. Home
  2. BBC
  3. BBC 6000
  4. BBC 6000
 

BBC 6000 Program

Format Contact ID only
Enter Program # + Installer Code (default is 4321) (System says “PROGRAM”)
Enter Data * + Location, enter Data (System reads back then “OKAY!”)
Exit Program *99 (System says “PROGRAM EXTI”)
Default System Power Down then Up on AC only while holding * on phone 5 seconds
Remote Program
  1. Call house, let ring twice then hang up, call again, OR let ring 12 times
  2. When panel answers press # + User Code + *, system now speaks status
  3. Press # + User Code + 1 to disarm system (do even if system is disarmed)
  4. Press User Code + 7 + Installer Code, your now in programming
    (While learning sensors press * 08 to go 2-way, 1 talks, 2 listens)
  5. Exit with *99
(All programming is done by telephone either Local or Remotely)
*06 – Door Chimes On/Off (Toggles On/Off)
*07 – Speaker Volume (0 = Low, 1 = Medium, 2 = High)
*08 – 2-Way Audio (1 = Talk, 2 = Listen, 23 = Hi Listen, 13 = Hi Talk, 9 = Hang Up)
*09 – Entry Delay 45 (01 to 60)
*10 – Exit Delay 45 (01 to 60)
*19 – Identify Sensor Press *19, panel says “Begin Sensor Test”
Activate Sensor, panel should beep and identify Zone
Wait 45 seconds to exit or enter new command
*20 – Learn Sensor Press * 20 + 2-Digit Zone Number to use (00 to 19)
Panel should say “Begin Sensor Test” activate sensor
panel beeps, Press # and system should say “OK”
– Delete Sensor Press *20 + + # + Sensor (00 to 19), Panel says “OFF”
– Assign Group Press * + Below Sensor Group (*21 to *45)
then Sensor Number (00 to 19), panel says “OK”
Sensor Groups/Types
*21 – Delay Sensor (Active in Level 2 Stay & Level 3 Away)
*22 – Instant Sensor (Active in Level 2 Stay & Level 3 Away)
*23 – Interior Follower (Active in Level 3 Away mode)
*24 – Interior Delay Motion (Active in Away mode)
*25 – Delay Windows/Door (Active in Away mode)
*30 – 24 Hr Special (Gun cabinets) (Must bypass to turn Off)
*31 – 24 Hr Aux. (Water/Freeze) (Must bypass to turn Off)
*32 – 24 Hr Special (Medicine Cabinets) (No Reporting)
*35 – Fire/Heat Sensor (Resets if system is disarmed)
*40 – Keyfob Supervised Audible Panic (Siren/Help Voice sounds)
*41 – Keyfob Unsupervised Audible Panic (Siren/Help Voice sounds)
*42 – Keyfob Supervised Panic (No Siren/Audible Help sound)
*43 – Keyfob Unsupervised Panic (No Siren/Audible Help sound)
*44 – Keyfob Supervised Silent Panic (No Siren/No Audible Help sound)
*45 – Keyfob Unsupervised Silent Panic (No Siren/No Audible Help sound)
*60 – Receiver Number (Up to 16 digits + # Pause = # within 1st 4 digits)
*61 – Receiver 2 Number (Up to 16 digits + #)
*64 – Account Number (4 digits)
*65 – Installer Code (4 digits (Default is 4321))
*67 – 2-Way Audio Enable (Toggles On/Off)
*87 – 2-Way Callback Enable (Toggles On/Off)
*88 – Remote Answering Enable (1 = Ring/Hang Ring, 2 = 12 Ring Answer)
*89 – Battery Test/Panel Tamper (Toggles On/Off)
*99 – Exits Programming