ATT 8000 Codes

Master Code Only one 3-digit User Code, no Secondary Codes
Hostage/Duress 3-digit code backwards

Change Code 1. Enter User Code then OFF at keypad (Panel beeps once, shows – 0 )
2. Press TEST/DEMO for 3 seconds (Display shows – 0 . )
2. Open keypad (Siren may sound but thats OK)
3. User Code is set by moving 3 wires in keypad under battery

  • Blue = 1st digit of code
  • White = 2nd Digit
  • Yellow = 3rd Digit

There are 10 holes labled 0 to 9, insert wires in sequence for Code
4. Press TEST/DEMO again to exit (Display shows – 0 )