Ademco Vista XM Basics
| Zones | 9 Hardwired, up to 64 by Hardwire Polling Loop or 5700 Wireless | ||
| Wireless | 5700 Series Receiver and Sensors only (Does not support 5800 Wireless) | ||
| Battery |
12 volt rechargeable Gel-Cell inside main panel All wireless batteries are 9-volt Alkaline |
||
| Downloadable | Yes | ||
| Panic Buttons |
|
||
| Event Log | None | ||
| Status | Press * if keypad shows NOT READY to view open zones | ||
| Arm Away | 4-digit code + 2 key (AWAY) | ||
| Arm Stay | 4-digit code + 3 (STAY) to arm everything but motions | ||
| Quick-Arm | (If Enabled) Press # + 2 for AWAY, # + 3 for STAY | ||
| Instant Arm | 4-digit code + 7 (INSTANT), this also bypasses motions | ||
| Max Arming | 4-digit code + 4 (MAX), arms everything including motions instant | ||
| Disarm | 4-digit code + 1 (OFF) | ||
| Silence Alarm | 4-digit code + 1 (OFF) twice to turn off siren and reset display | ||
| Bypass |
4-digit code + 6 (BYPASS) + zone (01, 02 03 etc) (keypad will beep and BYPASS will display + zone bypassed) |
||
| Alarm Memory | There is no alarm memory | ||
| Reset Smoke |
4-digit code + 1 (OFF) twice to turn off siren and reset smoke (If this does NOT reset set for service, smoke is bad) |
||
| Door Chimes | 4-digit code + 9 (CHIME) | ||
| Keypad Help | Hold down any function key (AWAY, STAY etc) Alpha keypad will display help | ||
| Test Sensors |
4-Digit Code + 5 (TEST) Keypad will beep every 3 minutes Open sensors and keypad will sound End test with 4-digit Code + 1 (OFF) key (Wireless motions require no movement for 4 minutes prior to testing) |
||
| Setting Clock |
1. Enter 4-digit code + #63 *Keypad shows current Clock settings, with ? showing current mode) 2. 6 changes from DAY/HOUR/MINUTE/MONTH/DATE/YEAR, 4 moves backwards 3. Press 3 or 1 to scroll value up and down 4. Press 8 to exit and save changes or * key to exit without saving |
||
| View Zones |
Press * or 0 for 3 seconds, Descriptions will scroll, press OFF to exit (This works only on 5137 Alpha Keypads) |