Ademco Vista 50P Codes
| Vista-50 99 total codes, (02 to 99), any code can be a Master or Manager Code | ||
| Vista-50P 75 total codes, (02 to 75), any code can be a Master or Manager Code | ||
| You cannot pause more than 2 seconds while entering below commands or it won’t work | ||
| Add Code |
1. Enter Master Code + 8 2. Enter User Code location (2 digit location) + new code 3. Keypad will ask “Add New User? 0 = NO, 1 = YES”, press 1 4. Keypad will ask “Authority Level ?” 1 = Master Code (Can perform all system functions in assigned partitions and can add/delete codes) 2 = Manager Code (Can perform all system functions in assigned partitions and can add/delete codes except for Master Code) 3 = Operator A (Can perform system functions in assigned partitions, but cannot add/delete codes) 4 = Operator B (Can perform system functions in assigned partitions, but cannot add/delete codes or bypass zones) 5 = Operator C (Can arm the system but can only disarm if the system was armed with this code) (Babysitter code) 6 = Duress/Hostage Code 5. Keypad will ask “RFButton?” Normally enter 0 7. If step 6 is Yes keypad will ask “Global Arm?” if Yes code will arm all partitions |
|
| Erase Code |
1. Enter Master or Manager Code + 8 (CODE) 2. Enter User Code (2 digit location) 3. Enter Master or Manager Code again 4. Keypad will say “Okay to Delete? 0 = NO, 1 = YES”, press 1 5. Keypad will say “User Code Deleted” |
|
|
Reprogram Master Code |
Installer Code + 8 + (2 digit location) + New Master Code (Keypad should beep) | |
| View User Info | 4 digit code + **, keypad will display Authority/Partition levels | |