1. Home
  2. Ademco
  3. Ademco Vista
  4. Ademco Vista
 

Ademco Vista 40 Codes

69 total codes, (01 to 69), any code can be Master or Duress or Regular User Code
You cannot pause more than 2 seconds while entering below commands or it won’t work
Add Code 1. Enter Master Code + 8
2. Enter User Code location (01 to 69) + new code
3. Keypad will ask “Add New User? 0 = NO, 1 = YES”, press 1
4. Keypad will ask “Authority Level ?”
   1 = Master Code
   2 = Manager Code
   3 = User in Partition 1
   4 = User in Partition 2
   5 = User in Partition 3
   6 = Duress/Hostage Code

5. Keypad may ask “RFButton?” (Normally enter 0)
6. Keypad asks “Multi Access?”
   0 to access one partition
   1 to access other partitions

7. If step 6 is Yes keypad will ask “Global Arm?”
   No = Code only arms its own Partition
   Yes = Code will arm partitions 0, 1 or 2
Erase Code 1. Enter Master or Manager Code + 8 (CODE)
2. Enter User Code (01 to 69)
3. Enter Master or Manager Code again
3. Keypad will say “Okay to Delete? (0 = NO, 1 = YES”, press 1)
4. Keypad will say “User Code Deleted”
Reprogram
Master Code

 Installer Code + 8 + (02 to 69) + New Master Code (Keypad should beep)
View Code Info 4 digit code + **, keypad will display Authority/Partition levels