Master Code P1 |
User 01 (Master not changeable by user in older Vista-20’s) |
Master Code P2 |
User 02 (User Codes in Partition 2 only changed by Partition 2 Master Code) |
Secondary Codes |
User 03 to 14 |
Babysitter Code |
User 15 (Disarms system only if Armed by Babysitter Code) |
Hostage Code |
User 16 |
|
Program Master |
Installer Code + 8 + (01 for Partition 1, 02 for Partition 2) + New Master Code |
Change Master |
Master Code + 8 + (01 for Partition 1, 02 for Partition 2) + New Master Code twice (Keypad should beep) |
(If this does not work panel is older version that must be downloaded)
|
Add Code |
Master Code + 8 + User (03 to 14) + New Code (Keypad should beep) |
Erase Code |
Master Code + 8 + User (03 to 14) wait 5 seconds (Keypad should beep) |
You cannot pause more than 2 seconds while entering below commands or it won’t work |