| Master Code |
User 2 (Old Via-30’s = User 1, only changed by downloading) Via-30PSE can have Master Code changed by user Via-30P or original Via-30 cannot, Master Code is in location *20 |
| Secondary Codes | User 3 to 6 (Old Via-30’s use 2 to 5) |
| Duress Code | User 8 (Old Via-30’s = 1 digit above code, if code is 1234 Duress is 1235) |
|
|
|
| Add Master |
Installer Code + 8 + 2 + New Master Code (Keypad should beep) (If this doesn’t work panel may be older Via-30P) |
| Change Master |
Master Code + 8 + 2 + New Master Code twice (Keypad should beep) (If this doesn’t work panel may be older Via-30P) |
| Add Code |
Master Code + 8 + User (3 to 7) + New Code (Keypad should beep) (Old Via-30’s have Users 2 to 7) |
| Erase Code |
Master Code + 8 + User (3 to 7) wait 5 seconds (Keypad should beep) (Old Via-30’s have Users 2 to 7) |
| After above commands keypad should beep indicating successful, if not try again | |
| You cannot pause more than 2 seconds while entering below commands or it won’t work | |
