1. Home
  2. Ademco
  3. Ademco Via
  4. Ademco Via
Zones 2 Hardwired, up to 30 Wireless
Batteries 12 volt rechargeable inside main panel, AC Transformer is 16 volts
Door/Windows 3-volt Lithium (Panasonic CR123A)
Motion Sensor 2 3-volt Lithium (Panasonic CR123A)
Smoke Detector 2 9-volt Alkaline (5808 LST – 2 3V Lithium CR123A)
Remote Keypads 9 Volt Alkaline
Keyfobs 3-volt Lithium (CR2430 Hearing Aid type)
Remote Panics 3-volt Lithium (Panasonic CR123A)
Downloadable Yes
Panic Buttons Police Panic – * and #
Fire Panic – 1 and *
Medical Panic – 3 and #
Status Press * if keypad shows NOT READY to view open zones
Arm AWAY 4-digit code + 2 (AWAY
Arm Stay 4-digit code + 3 (STAY)
Disarm 4 digit code + 1 (OFF)
Quick-Arm Press # + 2 for AWAY, # + 3 for STAY
Instant Arm 4 digit code + 7 (INSTANT)
Max Arming 4-digit code + 4 (MAX) to arm everything Instant
Silence Alarm 4-digit code + 1 (OFF) twice to turn off siren and reset display
(If code is entered wrong, wait 2 or 3 seconds then try again)
Door Chimes 4-digit code + 9 (CHIME)
Bypass 4-digit code + 6 (BYPASS) + zone (01, 02 03 etc)
Alarm Memory There is no alarm memory
Reset Smoke 4-digit code + 1 (OFF) twice to turn off siren and reset smoke
(If this does NOT reset smoke detector set for service, smoke is bad)
Test Sensors 4-Digit Code + 5 (TEST)
Keypad will beep every 3 minutes
Open sensors and keypad will sound
End test with 4-digit Code + 1 (OFF) key
(Wireless motions require no movement for 4 minutes prior to testing)
Activate Relay 4-digit Code + # + 7
Deactivate Relay 4-digit Code + # + 8
Pager Signals Only available on Vista-10SE (not older Vista-10)
Alarms Account + 1911 + 3 digit Zone #
Openings Account + 1001 + 3 digit User #
Closings Account + 1002 + 3 digit User #
Trouble Account + 1811 + 3 digit Zone #