| Master Code |
User 1 (Master only changed by downloading) |
| Secondary Codes |
User 2 to 4 |
| Duress Code |
User 8 (Old 4110’s = 1 digit above any code, if code is 1234 Duress is 1235) |
|
| Add Code |
Master Code + 8 + User (2 to 4) + New Code (Keypad should give 1 beep) |
| Erase Code |
Master Code + 8 + User (2 to 4) wait 5 seconds (Keypad should give 1 beep) |
| After above commands keypad should beep indicating successful, if not try again |
| You cannot pause more than 2 seconds while entering below commands or it won’t work |
