Ademco Safewatch 3000 Basics
| Batteries |
12 volt rechargeable inside main panel, AC Transformer is 16 volts Door/Windows 3-volt Lithium (Panasonic CR123A) Motion Sensor 2 3-volt Lithium (Panasonic CR123A) Smoke Detector 2 9-volt Alkaline Remote Keypads 9 Volt Alkaline Keyfobs 3-volt Lithium (CR2430 Hearing Aid type) Remote Panics 3-volt Lithium (Panasonic CR123A) |
| Downloadable | No, We do not have the available software |
| Panic Buttons |
Police Panic – * and # Fire Panic – 1 and * Medical Panic – 3 and # |
| Status | Press * if keypad shows NOT READY to view open zones |
| Quick Bypass | (if enabled) 4-digit code + 6, after 10 seconds, all open zones should show and bypass |
| Go to Partition | 4-digit code + * + the partition # (1, 2, 3) |
| Multiple Partition | Arming 4-digit code + 0 + Arming/Disarming command (1, 2, 3, 33, 7) |
| Arm AWAY | 4-digit code + 2 (AWAY |
| Arm Stay | 4-digit code + 3 (STAY) |
| Night-Stay | 4-digit code + 3 + 3 |
| Disarm | 4 digit code + 1 (OFF) |
| Quick-Arm | Press # + 2 for AWAY, # + 3 for STAY |
| Instant Arm | 4 digit code + 7 (INSTANT) |
| Walk Test | 4-digit code + 5 + 0 |
| Dialer Test | Installer code + 5 + 1 |
| Silence Alarm |
4-digit code + 1 (OFF) twice to turn off siren and reset display (If code is entered wrong, stop, press the [*] key and try again) |
| Door Chimes | 4-digit code + 9 (CHIME) |
| Bypass | 4-digit code + 6 (BYPASS) + 2 digit zone # (01, 02 03 etc) |
| Alarm Memory | There is no alarm memory |
| Reset Smoke |
4-digit code + 1 (OFF) twice to turn off siren and reset smoke (If this does NOT reset smoke detector set for service, smoke is bad) |
| Test Sensors |
4-Digit Code + 5 (TEST) Keypad will beep every 3 minutes Open sensors and keypad will sound End test with 4-digit Code + 1 (OFF) key (Wireless motions require no movement for 4 minutes prior to testing) |
| Activate Relay | 4-digit Code + # + 7 |
| Deactivate Relay | 4-digit Code + # + 8 |
| Pager Signals |
Alarms Account + 911 + 4 digit Zone # Openings Account + 101 + 4 digit User # Closings Account + 102 + 4 digit User # Trouble Account + 811 + 4 digit Zone # |
| View Time/Date: | 4-digit code + # + 63 |
| Change Time/Date: |
4-digit code + # + 63 + * Enter 2-digit Hour then * Enter 2-digit Minutes then * Enter 0 for AM; 1 for PM then * Enter 2-digit Year then * Enter 2-digit Month then * Enter 2-digit Day then * |
| View Event Log |
4-digit code + # + 60 Backwards: * Forwards: # Exit: Any key other than * or # |