Ademco Safewatch 2000 Basics |
|||
---|---|---|---|
Batteries |
12 volt rechargeable inside main panel, AC Transformer is 16 volts Door/Windows 3-volt Lithium (Panasonic CR123A) Motion Sensor 2 3-volt Lithium (Panasonic CR123A) Smoke Detector 2 9-volt Alkaline Remote Keypads 9 Volt Alkaline Keyfobs 3-volt Lithium (CR2430 Hearing Aid type) Remote Panics 3-volt Lithium (Panasonic CR123A) |
||
Downloadable | No, We do not have the available software | ||
Panic Buttons |
Police Panic – * and # Fire Panic – 1 and * Medical Panic – 3 and # |
||
Status | Press * if keypad shows NOT READY to view open zones | ||
Arm AWAY | 4-digit code + 2 (AWAY | ||
Arm Stay | 4-digit code + 3 (STAY) | ||
Night-Stay | 4-digit code + 3 + 3 | ||
Disarm | 4 digit code + 1 (OFF) | ||
Quick-Arm | Press # + 2 for AWAY, # + 3 for STAY | ||
Instant Arm | 4 digit code + 7 (INSTANT) | ||
Walk Test | 4-digit code + 5 + 0 | ||
Dialer Test | Installer code + 5 + 1 | ||
Silence Alarm |
4-digit code + 1 (OFF) twice to turn off siren and reset display (If code is entered wrong, stop, press the [*] key and try again) |
||
Door Chimes | 4-digit code + 9 (CHIME) | ||
Quick Bypass | 4-digit code + 6 and wait 5 seconds; all open zones will bypass | ||
Bypass | 4-digit code + 6 (BYPASS) + 2 digit zone # (01, 02 03 etc) | ||
Alarm Memory | There is no alarm memory | ||
Reset Smoke |
4-digit code + 1 (OFF) twice to turn off siren and reset smoke (If this does NOT reset smoke detector set for service, smoke is bad) |
||
Test Sensors |
4-Digit Code + 5 (TEST) Keypad will beep every 3 minutes Open sensors and keypad will sound End test with 4-digit Code + 1 (OFF) key (Wireless motions require no movement for 4 minutes prior to testing) |
||
Activate Relay | 4-digit Code + # + 7 + Device # | ||
Deactivate Relay | 4-digit Code + # + 8 + Device # | ||
Pager Signals | |||
Alarms | Account + 911 + 4 digit Zone # | ||
Openings | Account + 101 + 4 digit User # | ||
Closings | Account + 102 + 4 digit User # | ||
Trouble | Account + 811 + 4 digit Zone # |