Ademco 4140XMPT Basics

Zones 9 Hardwired, up to 64 total zones with wireless
Wireless Yes
Batteries Main Panel 12 volt rechargeable Gel-Cell inside main panel
AC Transformer is 16.5 Volts
Doors/ Windows/Motions 3-volt Lithium (Panasonic CR123A)
Smoke Detector 2 9-volt Alkalines
Keyfobs and Panics 2 3-volt Lithium (CR2025 Hearing Aid type)
Note: some keyfobs and panics use CR2430 Lithium
Panic Buttons Police Panic – * and #
Fire Panic – 1 and *
Medical Panic – 3 and #
Status Press * if keypad shows NOT READY to view open zones
Arm Away 4-digit code + 2 (AWAY) to arm everything
Arm Stay 4-digit code + 3 (STAY) to arm everything but motions
Quick-Arm (If Enabled) # + 2 for AWAY, # + 3 for STAY
Instant Arm 4-digit code + 7 (INSTANT), also bypasses motions
Max Arming 4-digit code + 4 (MAX), arms everything including motions instant
Disarm 4-digit code + 1 (OFF)
Silence Alarm 4-digit code + 1 (OFF) twice to turn off siren and reset display
Bypass 4-digit code + 6 (BYPASS) + Zone (01, 02 03 etc)
(Keypad will beep and BYPASS + Zone will show on display)
Door Chimes 4-digit code + 9 (CHIME)
Reset Smoke 4-digit code + 1 (OFF) twice to turn off siren and reset smoke
(If this does NOT reset smoke detector set for service, smoke is bad)
Alarm Memory 1. Enter 4-digit code + # + 6 + 0, select 0 for Recent or 1 for Complete log
2. Select Partition (press 0 for all partitions)
3. Press 1 for previous log entries or 3 for next log entries
4. Press 8 to select catagory and 8 again for next entry
5. Press * to exit
Test Sensors 4-Digit Code + 5 (TEST)
Keypad will beep every 3 minutes
Open sensors and keypad will sound
End test with 4-digit Code + 1 (OFF) key
(Wireless motions require no movement for 4 minutes prior to testing)
Setting Clock 4-digit code + #63
6 moves from Hour to Minute to Month to Date to Year
4 moves backwards
Press 3 or 1 to change values
Press 8 to save and exit, press * to exit without saving
Access Partition * + Partition (0 to 2)
View Messages Hold 0 for 5 seconds