Ademco 4110XMP Codes

Master Code = User 1 (Master only changed in programming at location *20)
Secondary Codes = User 2 to 7 (Old versions only have Users 2 to 4)
Duress Code = User 8 (Old versions 1 digit above any User Code)
(if code is 1234 Duress is 1235)

Add Code Master Code + 8 + User (2 to 7) + New Code (Keypad should give 1 beep)
Erase Code Master Code + 8 + User (2 to 7) wait 5 seconds (Keypad should give 1 beep)
After above commands keypad should beep indicating successful, if not try again
You cannot pause more than 2 seconds while entering below commands or it won’t work