Ademco 4110XM Codes
| Master Code | = User 1 | (Master only changed in programming at location *20) | |
| Secondary Codes | = User 2 to 7 | (Old versions only have Users 2 to 4) | |
| Duress Code | = User 8 |
(Old versions 1 digit above any User Code) (if code is 1234 Duress is 1235) |
|
|
|
|||
| Add Code | Master Code + 8 + User (2 to 7) + New Code | (Keypad should give 1 beep) | |
| Erase Code | Master Code + 8 + User (2 to 7) wait 5 seconds | (Keypad should give 1 beep) | |
| After above commands keypad should beep indicating successful, if not try again | |||
| You cannot pause more than 2 seconds while entering below commands or it won’t work | |||