Ademco 4110XM Basics
| Zones above 10 are Wireless | |||||||||
| Zones | 6 Hardwired, 8 Wireless | ||||||||
| Battery |
12 volt rechargeable Gel-Cell inside main panel AC Transformer is 16.5 volts, screwed into outlet somewhere in house |
||||||||
| Wireless |
5700 series Wireless all use 9-volt Alkaline |
||||||||
| Downloadable | Yes | ||||||||
| Event Log | None | ||||||||
| Panic Buttons |
|
||||||||
| Status | Press * if keypad shows NOT READY to view open zones | ||||||||
| Arm AWAY | 4-digit code + 2 (AWAY) | ||||||||
| Arm STAY | 4-digit code + 3 (STAY) | ||||||||
| Instant Arm | 4 digit code + 7 (INSTANT) | ||||||||
| Max Arming | 4-digit code + 4 (MAX), arms everything including motions instant | ||||||||
| Quick-Arm | (If Enabled) Press # + 2 for AWAY, # + 3 for STAY | ||||||||
| Disarm | 4 digit code + 1 (OFF) | ||||||||
| Silence Alarm | 4 digit code + 1 (OFF) twice to turn off siren and reset display | ||||||||
| Bypass | 4-digit code + 6 (BYPASS) + zone (01, 02 etc), BYPASS and zone should display | ||||||||
| Alarm Memory | Last alarms only shows until system disarmed for the second time | ||||||||
| Test Sensors |
4-Digit Code + 5 (TEST) Keypad will beep every 3 minutes Open sensors and keypad will sound End test with 4-digit Code + 1 (OFF) key (Wireless motions require no movement for 4 minutes prior to testing) |
||||||||
| Reset Smoke |
4-digit code + 1 (OFF) twice to turn off siren and reset smoke (If this does NOT reset smoke detector set for service, smoke is bad) |
||||||||
| Door Chimes | 4-digit code + 9 (CHIME) CHIME should appear on keypad display | ||||||||
| Pager Signals | Only available on really new 4110XM’s | ||||||||
|
|||||||||