ADC Pan/Tilt Camera

    Install The Camera(s):

    1. Connect the camera’s AC adaoter and plug it into a non-switched outlet.
    2. Press and hold the camera’s WPS button for 3 seconds and then press the corresponding WPS button on the router.

      • From a computer on the same network as the camera, log intot he customer’s account at www.alarm.com.
      • Type www.alarm.com/addcamera into the browser’s address bar and followt he on-screen instructions to add the camera to the account.
      Note: If the router does not have a WPS button or if you have trouble connecting, use a standard ethernet cable to connect the camera to the network router