Normally you should NEVER have to get into programming, default settings work fine |
Enter Program |
1. Press * + 8 |
(STAY/CHIME/EXIT/BYPASS/CANCEL lights will flash) |
|
2. 9713 (default) |
(STAY/CHIME/EXIT/BYPASS/CANCEL lights flash, SERVICE turns ON) |
|
3. 64 + # |
(64 is the Module number) |
(If incorrect Install code entered STAY/CHIME/EXIT/BYPASS/CANCEL will continue flashing) |
Move to Location |
Location + # |
Enter Data |
Enter data + * which saves and moves to next digit within location, # exits at any time |
Exit Program |
Press EXIT key twice |
|
|
0# |
Option Flags |
(Toggle On/Off then * to save, # exits) |
Default |
|
Option ON |
OFF |
OFF |
I_OFF_I |
1 Callback Mode Instant |
ON/Line Hold Mode |
OFF |
I_OFF_I |
2 Listen-In Only |
Normal 2-way |
OFF |
I_OFF_I |
3 Speaker Lockout Disabled |
Automatic Speaker Lockout |
ON |
I_ON_I |
4 Microphone A ON at Startup |
OFF |
ON |
I_ON_I |
5 Microphone B ON at Startup |
OFF |
OFF |
I_OFF_I |
6 Call-In AMD |
OFF |
OFF |
I_OFF_I |
7 Enable Levels 7 & 8 |
Levels 7 & 8 Disabled |
OFF |
I_OFF_I |
8 Reserved |
|
1# |
Callback Access Code |
I_1_I_2_I_3_I_4_I_5_I
10 = *
11 = #
12 = None
13 to 15 = Any digit
|
(Enter 5 digits then * to save and exit) |
2# |
Line Hold Digit |
I_15_I
(15 = F)
10 = *
11 = #
12 = None
13 to 15 = Any digit
|
(Enter 5 digits then * to save and exit) |
|
3# |
Timing Options |
(1 to 3 digits, * saves and moves to next, # exits) |
Default |
60 |
I_ _I |
Line Hold Timeout |
(10 to 255 seconds) |
20 |
I_ _I |
New Trip Hangup Time |
(1 to 255 seconds) |
5 |
I_ _I |
Callback Window |
(1 to 255 minutes) |
12 |
I_ _I |
Max # of digits during Code Entry |
(6 to 255 attempts) |
90 |
I_ _I |
Session inactivity Hang-Up Time |
(30 to 255 seconds) |
20 |
I_ _I |
Point for Time remaining Tone “A” |
(1 to 255 seconds) |
10 |
I_ _I |
Point for time remaining tone “B” |
(1 to 255 seconds) |
0 |
I_ _I |
Anti-Lockupt Tone Time |
(1 to 255 seconds, 0 disables)
|
4# |
Volume / Ring Control |
(Enter 1 digits, * saves and moves to next, # exits) |
Default |
60 |
I_ _I |
Low Gain Microphone Volume |
(0 to 9) |
20 |
I_ _I |
High Gain Microphone Volume |
(0 to 9) |
5 |
I_ _I |
Speaker Volume |
(0 to 9) |
12 |
I_ _I |
# of Rings for Call-in Features |
(0 to 9, 0 disables) |
|
Rest is X-10 stuff and under construction
|